Performance Components

DeLorean Industries offers a wide variety of performance and innovative products for owners to install themselves. Along with core replacement parts for our proprietary in house product lines to assist with maintenance away from our facility when possible.    

  • 1. SPEC EFI (MANUAL/AUTO TRANSMISSION) INSTALLED

    1. SPEC EFI (MANUAL/AUTO TRANSMISSION) INSTALLED

    Delorean Industries Electronic Fuel Injection system. Removes failure prone stock Bosch K jet and CIS components in their entirety. Fully integrated fuel injection system. A complete modern replacement bringing the car to modern running standards and...

    $9,995.00
  • 1. SPEC SUSPENSION COIL OVER PACKAGE

    1. SPEC SUSPENSION COIL OVER PACKAGE

    DeLorean Industries SPEC suspension handling package. Includes front and rear coil over system with custom lower stainless front control arms.  NOTE system is designed to work only with modified DPI lower stainless arms. Lower arms do not include...

    $2,595.00
    Add to Cart
  • 19. HIGH FLOW CONVERTER STOCK EXHAUST

    Delorean Industries direct replacement emissions converter. Slim high flow design allows for direct use with stock components while addressing heat issues on critical engine areas. Includes all required gaskets and hardware for installation. On average a...

    $345.09
    Add to Cart
  • 3. GEAR CHANGE LEVER STAINLESS

    3. GEAR CHANGE LEVER STAINLESS

      Delorean Performance Industries Gear Change Lever. With age this component is showing an increased failure rate. Commonly damaged due to the use of stainless shifter plates. Manufactured by Delorean Performance Industries ensuring the finest fit...

    $89.95
    Add to Cart
  • 60. FRONT END RECALL KIT PERFORMANCE

    60. FRONT END RECALL KIT PERFORMANCE

    (2) 108998 Clamp, Stab bar (1) 111140 Brkt, Strengthen RH (1) 111141 Brkt, Strengthen LH (4) 111204 Bolt, Stab bar clamp (4) 111205 Spacer, Stab bar clamp (2) SP10050 Nut M12 (2) SP10330 Nut, Stab. bar (4) SP10340 Cotter Pin, B.Joint (4) SP10877 Castle...

    $195.60
    Add to Cart
  • CYLINDER HEAD PACKAGE (STOCK)

    Delorean Industries stock cylinder head package. Includes left and right cylinder heads with complete valve job and seals.  Offered in house only. 

    $2,695.00
  • ENGINE PISTON 2.8

    Delorean Performance Industries 2.8 PRV piston. Includes piston rings and wrist pin. Manufactured and used by DPI. Ensuring the highest quality and fitment possible.

    $295.95
  • MANUAL TRANSMISSION SHIFT LINKAGE CARBON FIBER BODY

    DeLorean Industries carbon fiber bodied manual tranmission shift linkage. Designed to replace flawed factory configuration resulting in a less than desirable driving experience. Requires updated frictionless bell crank configuration and shoulder bolt kit.

    $295.35
  • SPEC COIL OVER SYSTEM

    DeLorean Industries front/rear coil over system. Designed to update the flawed factory spring configuration allowing for infinite adjustment front to rear on the DMC-12 platform. Includes loaded front and rear shock assemblies with springs. NOTE: If...

    $1,549.00
    Add to Cart
  • SPEC FRONT BRAKE UPGRADE

    SPEC FRONT BRAKE UPGRADE

    The most comprehensive brake system update ever devised for the DeLorean DMC-12 Chassis. Updates the front brake system in it's entirety.     What's in the box:  x1__ Left front caliper assembly (with associated...

    $2,598.54
    Add to Cart
  • SPEC I EXHAUST COLLECTOR GASKET

    Replacement collector gaskets set for the SPEC I exhaust system. Only required if lost or damaged. SPEC I systems supplied with pair when purchased. Copper reusable gasket.   USED ON: SPEC I exhaust kit SPEC Header kit SPEC 3 twin turbo...

    $15.66
    Add to Cart
  • SPEC TEST PIPE KIT

    Exhaust test pipe kit. Used for testing CO adjustment when cross over pipe location points not accessible. For off road testing use only.

  • THROTTLE BODY TO METERING HOUSING SPACER

    Delorean Industries solid throttle body to metering housing spacer. Direct replacement for previously NLA component. Flow tested on our in house bench configuration to maximize performance. Includes lapped face finish allowing for gasketless install when...

DeLorean Industries (DPI, Di or DeLorean Performance manufactured products) restores and modifies existing DeLorean automobiles for its customers. DeLorean Industries does not manufacture or sell new vin replica automobiles but does replicate, engineer and innovate every component involved replacing the majority of the factory components. DeLorean Industries builds cars from scratch within the constraints of using existing "true" factory DeLorean vehicle identification numbers. DPI is not sponsored, associated, approved, endorsed nor, in any way, affiliated with the original DeLorean Motor Company or the replica outfit Delorean Motor Company (Texas). Any branded component products mentioned are the trademarks of their respective holders and are held in the highest of regards through mention as valued contributors to our efforts. Any mention of trademarked names or other marks is for purpose of reference only. The product of DeLorean Industries uncompromising effort is a DeLorean DMC-12 restored and innovated by DI. Out of respect for John DeLorean and his Legacy, this innovated machine should never under any circumstances be referred to or described as a "DI DeLorean," "DI DMC-12," or in any other manner that suggests that it is anything but a 1981-83 DeLorean DMC-12.